Joined in 2023 
82 
63 About this deal
When painting skirting boards, long, confident brush strokes are best. I always start by cutting in at the top of the skirting board (where it meets the wall), a few centimetres from the corner. Depending on your chosen paint, you might need to use a primer first. We'd always recommend this step if your boards are bare, as it gives a much better finish, but some paints do have primer built in, so you might be able to get away with this step. If not, apply your primer with a good quality brush, leave to dry, give a light sand and then wipe, followed by a second coat. Then, before starting with the first layer of your chosen paint, give it a light sand and wipe again. Yup, even your skirting boards way down at the bottom of your wall need to be prepared before you get all gung-ho about things. The level of prep they will need depends on their state. For old, previously painted boards, make sure any holes or dents are filed, dust and dirt is removed and you give them a good wipe down with a damp cloth. Then give them a light sand with a medium coarse sand paper. Alternatively, you could use an electric sander. This is especially important for boards previously painted in a gloss paint. So there you have it - a guide to cutting in. Remember, it will almost certainly take a few attempts before you master the art. With this in mind, you could always practice on a test area before attempting it for real! Eggshell: Offers a low-sheen finish that's between matte and satin. It's less reflective and gives a more subtle appearance.
skirting boards with carpet - Ideal Home How to paint skirting boards with carpet - Ideal Home
Choosing the right skirting board for your home is an often overlooked design consideration. "While unlikely to be the key focal point in any room, skirting is a small yet important detail that has the potential to make or break your home's decor," begins Rebecca Foster. Proper preparation is crucial for achieving a professional finish on your skirting boards. Here's a step-by-step guide to get you started: Always take your time removing painters/masking tape. You don’t want to pull off bits of paint, plaster or wallpaper and ruin the look you’ve worked so hard to achieve. Aftercare for newly painted skirting boards involves keeping them as clean as possible. It’s recommended to use a combination of wet and dry techniques. Skirting boards can be kept clean using the following utensils: Material is another factor. If the board is going to be painted, you could use low-cost MDF rather than timber. While tiles laid on a floor in a hallway or bathroom can be used as a skirting to give the impression of greater width by using the same material as the floor.
Test a Small Area First: Before committing to a particular paint or finish, it's always a good idea to test a small, inconspicuous area first.
Skirting Boards With Carpet: Keeping Them Clean How To Paint Skirting Boards With Carpet: Keeping Them Clean
When it comes to brands, you're spoilt for choice. Here are some products that come highly recommended for skirting board paint: What Is the Best Paint for Woodwork That Stays White? For woodwork that stays white, look for high-quality, non-yellowing paints. Brands like Dulux and Crown Trade offer paints specifically designed to retain their whiteness over time.
Prep and Painting Step-by-Step
When you’ve finished sanding, use a cloth to wipe away any excess dust. Protect yourself by wearing a dust mask when sanding. Skirting board colour ideas are important too — the Victorians used maroons and browns, grained to look like wood. These colours are not popular now, but a neutral white to contrast with coloured walls works well. Before you start painting again, make sure the painter’s tape and other methods of protection are still in place. Now, go through the painting process again for the second coat.
Flexible Skirting Board - Self Adhesive Skirting Trim
Does Satinwood Paint Stay White? High-quality satinwood paint is less likely to yellow over time compared to cheaper alternatives. However, all paints are subject to some degree of discolouration due to factors like sunlight exposure and general wear and tear. If the skirting boards contain any knots, treat them with a knotting solution. It’s important not to skip this step, as any knots you paint over will show through, no matter how many coats you apply. Use a brush to apply a thin layer of knotting solution to the wood. Leave to dry and apply a second coat if necessary. The style and period of your home, and the height of your rooms, will be important factors when choosing the right type of skirting," adds Claire Lloyd, editor of Homebuilding & Renovating. "Simple styles typically suit more modern properties, while more decorative types tend to sit better in period houses."Do I Need to Rub Down Skirting Boards Before Painting? Yes, it's advisable to rub down your skirting boards before painting. Sanding helps to create a smooth surface for the paint to adhere to and also removes any existing paint or varnish, which can affect the new coat. Use fine-grit sandpaper and always sand in the direction of the wood grain to avoid scratches. Once you have all the necessary masking/painters' tape in place, lay down any dust sheets or carpet protection before you start painting. An Art Deco style skirting board was chosen for this traditional-style self build. The soft off-white delicately contrasts with the pale walls. (Image credit: Fiona Murray) Why Use Skirting Board? This ultimately depends on what you’re painting. If you’re looking to paint skirting boards with carpet in place, it’s relatively easy to simply protect the edges using masking tape. Also, when cutting in it is best to paint in short bursts and adding just a little paint to the brush each time. This helps to paint straight lines more easily and keep the finish looking professional. Don't squeeze the brush against the surface as this can lead to paint drips - use a light touch and keep a steady hand! Using Masking Tape
Great Deal 
New Comment 