McAlpine V33WM Twin Connector, White

Product Information

When you are fitting this tee, slide the nut and washer onto your pipe first, then install the tee (otherwise you can push the washer into the wrong part of the tee). McAlpine V33WM twin connector connects the waste pipe hoses from two appliances (dishwasher and washing machine) into a single 40mm (1-1/2 inch) vertical waste standpipe. McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals.

Product Code: V33WM McAlpine Twin Appliance Connector - Discharge Into Stand Pipe The McAlpine V33WM is a twin discharge appliance connector. It will fit snug if you tighten the connection as tight as you can, using plummers tape can help (although I didn't need too), I've had no leaks to date. We have just moved into a house with a utility room, it needed the plumbing adapting so we could fit a washer and a dishwasher but there was only one cold feed and one standpipe with a u bend.

The solution was easy, because I was able to unscrew the "arm" from one side of the adaptor, pull the waste pipe and the arm out so that I could get to it with both hands, and then I was able to use sufficient force to push the waste pipe far enough along the arm so that it wouldn't come off. It allows for the efficient and safe disposal of waste water from two appliances, such as a washing machine and dishwasher. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The McAlpine V33WM Twin Connector is made from high-quality materials, ensuring its durability and resistance to wear and tear.

Please remember it can take some time for your bank or credit card company to process and post the refund too. I could only get one of my arms in to reach the standpipe without moving the washing machine out, and that would have been too much trouble to do.What I did find was that I was not able to get one of the waste pipes fitted far enough along the tube to which it attaches with the adaptor in place. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Mcalpine commenced manufacturing plumbing products in 1902 and in 1957 was the first United Kingdom company to manufacture plastic traps.

The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting. For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. It is supplied with blanking plugs and is designed for plumbing two domestic appliances into a standpipe trap (WM3). Ok, now onto the pipe size, the product has a 40mm pipe connection, if like me and you have old waste pipe of 38mm, then you need to be careful how you fit this product. Copyright PlumbNation 2024 PlumbNation, Millennium Court, Enterprise Way, Evesham, Worcestershire, United Kingdom, WR11 1GS.The twin connector connects directly to the standpipe allowing you to discharge 2 appliances through 1 standpipe, an air break as specified by appliance manufactureres is incorpaorated within the connector. The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.